Quadro-K Potasyum ve Kükürt Tiyo Sülfat 20 litre

GENERAL FEATURES

• It is a liquid fertilizer containing high amounts of POTASSIUM and SULFUR.
• 100% water soluble.
• CHLORINE-FREE: an excellent source of potassium for chlorine-sensitive plants.
• It has an effect on coloration, especially in fruits and many plants.
• Can be mixed with most liquid fertilizers. It should not be mixed with strong acids and ammonia.
• It can be used easily in all kinds of irrigation systems and does not clog irrigation pipes.
• It can be used alone or in a mixture as leaf fertilizer.
• It is an excellent source of sulfur as a plant nutrient and soil regulator.
• It increases the availability of plant nutrients such as iron and manganese, which remain immobile due to high pH.

  Content Elements% w/wPotassium (K 2 O)25Sulfur (SO 3 )42

  GENERAL INFORMATION

  Quadro-K is a basic, chlorine-free, liquid solution containing 25% potassium and 42% sulfur. Quadro-K can be applied in drip, sprinkler or flood irrigation systems. Quadro-K can be mixed with urea and ammonium polyphosphate solutions in any proportion. Potassium reacts with nitrate and KNO3 crystal. When this happens, adding water or increasing the temperature results in a clear solution again.

  In case of mixing with microelements and pesticides, trial mixtures must be made before making large amounts of mixtures. When Quadro-K is mixed with liquid fertilizers and/or pesticides, the mixing should be done in the following order: water, pesticide, Quadro-K and/or other fertilizers.
  

  General Applications and Usage Recommendations

  Quadro-K can be applied to a wide variety of plants such as ornamentals, lawns, greenhouse plants and other outdoor plants. In general, the need for potassium in all plants increases significantly during periods of rapid growth and fruit development. Quadro-K applications should be made based on soil and/or tissue analysis for potassium.

  
  

  Soil Application

  It is appropriate to use it at a dose of 2-3 L/da for starter fertilizer, exit fertilizer or future applications. Quadro-K can be used alone or in combination with other fertilizers. Quadro-K is a very good source of potassium and sulfur during critical periods for plants.

  
  

  Leaf Application

  Quadro-K can be mixed with many different fertilizers and used as foliar application to designated plants (maximum 1L mixed with 100L of water). When used for foliar applications, Quadro-K must first be mixed with water before application. The pH value of mixtures made with Quadro-K should not be lower than 6.0.

   

  
  

  Soil Applications	Fergitation	Leaf Applications
  2.3 L/da	1-2 L/da	0.25-1L/100L water

  *Make 2-3 applications at 15-20 days intervals.